Fisher & Paykel 868686 FP-XWF FWC5 Haier HRXWF H0060869187 GE XWF Water Filter
$60.90
Fisher & Paykel 868686 FWC5, Haier HRXWF H0060869187, Refrigerator Water Filter.
$60.90 each, including GST, or SAVE when you buy two $59.07 each
May be used with Fisher & Paykel Refrigerator Models beginning with RF500Q and
Haier HRF580YP and HRF680YP models.
Important: Please check your filter for the part number before purchasing.
| 1 | 2 | 3 | 4-5 | 6+ |
| $60.90 | $59.07 | $58.77 | $58.46 | $57.86 |
Fisher & Paykel genuine 868686 FWC5 | Haier HRXWF H0060869187 | GE XWF | Refrigerator Water Filter.
Fisher & Paykel 868686 FWC5 Removes chlorine, chemicals and contaminants from your drinking water resulting in fresh clean tasting and smelling water
May be used with Fisher & Paykel Refrigerator Models beginning with RF500Q; and
Haier HRF580YP and HRF680YP models.
Important: Please check your filter for the part number before purchasing.
Fisher & Paykel 868686 FWC5 Refrigerator Water Filter Features:
- Removes chlorine, chemicals and contaminants
- Reduces Bisphenol A (BPA) Lead Mercury
- Reduces Cysts
- Tested to meet NSF/ANSI Standards
Fisher & Paykel 868686 FWC5 Part Numbers:
Has been known by, or replaces, the following model and part numbers:
Fisher & Paykel: | 868686 | FWC5 | FP-XWF
Haier: | HRXWF | H0060869187 |
GE: XWF
Fisher & Paykel 868686 FWC5 can be used in Refrigerator Models:
Fisher & Paykel Refrigerator Models beginning with RF500Q; and
Haier HRF580YP_ [ HRF580YPC HRF580YPS ] and HRF680YP models
IMPORTANT: Please ensure you Check your exisiting Water Filter for the correct part number before purchasing.
Fisher & Paykel 868686 FWC5 Refrigerator water Filter Specifications:
- Capacity: 757 litres (200 US gallons)
- Flow Rate Maximum: 2.46L/min (0.5GPM)
- Filter Life: Recommended change interval 6 months for optimal water drinkability and flow. Change earlier if capacity used or flow declines.
- Min / Max Working Pressure: 207 – 689kPa (30-100 psi)
- Min / Max Operating Temperature: 1 – 38 degrees C° (33F-100F)
- Micron Rating: 1 micron
- Size: 156mm x 56mm
Installation Tips and Instructions:
- Squeeze the two front tabs of the filter housing and pull down gently to reveal the cartridge.
- Line up the ports on the top of the filter with the ports in the cartridge holder and gently insert.
- Slowly turn the filter approximately 90 degrees(1/4 turn) anticlockwise until it stops. Do not overtighten. As you turn 1/4 anticlockwise, the arrow on the filter should align with the arrow on the cartridge holder.
- Slowly push the filter back up into the housing clips
- Close the housing by gently pushing the cover upward until the tabs lock into place.
- Run water through the dispenser for up to 3 minutes or until water runs clear.
- Reset your fridge filter indicator light using the instructions in your fridge manual.
